RPT-1003CU 1000VA Line Interactive UPS

Line Interactive UPS with interactive topologyControlled by a technologically advanced microprocessor guaranteeing high reliabilityEquipped with 2 boost & 1 buck AVR function to regulate output voltageCold start function: built-in DC start function enables UPS to be started without AC power suppliedAuto Restart Upon AC RecoveryBuilt-in CCCV Battery ChargerOff-mode ChargingUPS Green Mode: Energy saving functionUSB port and cable for managing functions via PC

Model USB RPT‎-1003CU
Capacity 1KVA/600W
Voltage 110/115/120VAC or 220/230/240VAC
Input Voltage Range ‎-30%+25%
Frequency 50Hz or 60Hz ‎(‎Auto Sensing‎)‎
Voltage Regulation
‎(‎Batt‎.‎ Mode‎)‎ 110/115/120VAC or 220/230/240VAC +/‎-10%
Frequency 50Hz or 60Hz +/‎- 1Hz
Output Waveform Simulated Sine wave
Transfer Time < 6ms ‎(‎Typical‎)‎
IEC‎-320/Nema 5‎-15R
/Universal/German 6/6/2/3
Battery Type 12V/7AH*2PCS
Voltage 12VDC
Recharge Time 5hr to 90% after complete discharge
Battery Battery Protection Over discharge protection & short Circuit protection by fuse
Advanced Battery
Management Yes
Battery Back‎-up Time Depending on connected load
Display LCD status display UPS status‎,‎ I/P & O/P Voltage & Frequency‎,‎ Load %‎,‎ Battery %
Battery Mode Beeping twice every 8 second
Audible
Allarm Low Battery Beeping five times every second
Overload Beeping continuously
Fault Beeping continuously
AVR ‎(‎Auto‎.‎ Voltage
Regulation‎)‎ 2 Boost + 1 Buck
DC Start Function Yes
Auto‎.‎ Restart UPS Yes
Function Modem/Phone protection
‎(‎Optional‎)‎ RJ‎-11
Communication port
‎(‎Optional‎)‎ USB port
Software OPTIONAL
Operating Temperature 0°C ‎- 40°C ‎(‎32°F~104°F‎)‎
Environment Humidity 0‎-95% ‎(‎No condensing‎)‎
Audible Noise <40 dB at 1M
Safety Standard CE ‎(‎EN62040‎-1‎-1‎,‎ EN50091‎-1‎)‎
Regulation
EMC Standard FCC Part 15 Class B‎,‎ CE‎(‎EN50091‎-2‎,‎ EN61000‎-3‎-2‎,‎ EN61000‎-3‎-3‎)‎
Physical Dimension‎(‎D*W*H‎)‎ 305*98*170mm