RPT-2003CU 2KVA/1200W Line Interactive UPS with LCD Status Display

Line Interactive UPS with interactive topology Controlled by a technologically advanced microprocessor guaranteeing high reliability Equipped with 2 boost & 1 buck AVR function to regulate output voltage Cold start function: built-in DC start function enables UPS to be started without AC power supplied Auto Restart Upon AC Recovery Built-in CCCV Battery Charger Off-mode Charging UPS Green Mode: Energy saving function USB port and cable for managing functions via PC User-friendly LCD Display

Model USB RPT‎-2003CU
Capacity 2KVA/1200W
Voltage 110/115/120VAC or 220/230/240VAC
Input Voltage Range ‎-30%+25%
Frequency 50Hz or 60Hz ‎(‎Auto Sensing‎)‎
Voltage Regulation
‎(‎Batt‎.‎ Mode‎)‎ 110/115/120VAC or 220/230/240VAC +/‎-10%
Frequency 50Hz or 60Hz +/‎- 1Hz
Simulated Sine wave
Output Waveform
Transfer Time
IEC‎-320/Nema 5‎-15R
/Universal/German 8/8/6/6
Battery Type 12V/9AH * 2pcs
Voltage 12VDC
Recharge Time 5hr to 90% after complete discharge
Battery Battery Protection Over discharge protection & short Circuit protection by fuse
Advanced Battery
Management Yes
Battery Back‎-up Time Depending on connected load
Display LCD status display UPS status‎,‎ I/P & O/P Voltage & Frequency‎,‎ Load %‎,‎ Battery %
Battery Mode Beeping twice every 8 second
Beeping five times every second
Audible
Allarm Low Battery
Overload Beeping continuously
Fault Beeping continuously
AVR ‎(‎Auto‎.‎ Voltage
Regulation‎)‎ 2 Boost + 1 Buck
DC Start Function Yes
Auto‎.‎ Restart UPS Yes
Function
Modem/Phone
protection RJ‎-11
Communication port USB port
Software OPTIONAL
Operating Temperature 0°C ‎- 40°C ‎(‎32°F~104°F‎)‎
Environment Humidity 0‎-95% ‎(‎No condensing‎)‎
Audible Noise